YORKVILLE PULSE PS110P Manuel De L'utilisateur page 4

MULTIPLE PS110P's
As well as accommodating the full-range speakers, the parallel input jacks allow many PS110P's
to be connected in a string. There is no practical limit to the number of PS110P's that may be
connected together.
Full Range
PS110P
Full Range
Cabinet
PS110P
USER NOTE
For normal operation connect the PS110P just like any ordinary speaker along with the full-range
speakers. The input level switch should be set to speaker. If the audio source does not have a U
ground (a ground pin on the AC cord), the ground lift switch must be set to gnd. The PS110P may
be wired before or after the full-range speakers. The PS110P does not alter the signal to the full-
range speakers. The PS110P will not draw any power from the amplifier driving the full-range
speakers. Please note that an external crossover is not necessary.
Cabinet
Power Amplifier
Amp In
Amp In
Power Amplifier
Output A
Mixer/Pre Amp
2
Full Range
Cabinet
Amp Out
PS110P
Full Range
Cabinet
Amp Out
Output B
PS110P
figure 2
figure 3