Christopeit Sport DELTA Notice De Montage Et D'utilisation page 20

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
Step 6:
Installation of the right and left pedal (25L+25R) at pedal arms (24L+24R).
1.
Screw the left pedal (25L) into the threaded hole on the left hand side
of the pedal arm (24L) and tighten firmly. (Note: The threaded part of
the left pedal has to screw anticlockwise into the threaded hole of the
pedal crank.) The pedals are marked "R" for right and "L" for left.
2.
Screw the right pedal (25R) into the threaded hole on the right hand
side of the pedal arm (24R) and tighten firmly. (Note: Right and left is
specified as viewed seated on the machine during training. It must
also be observed that the threaded part of the right pedal has to screw
clockwise into the threaded hole of the pedal crank.)
3.
Then attach the pedal straps left and right to the respective pedals
(25R+25L).
Step 7:
Installation of the power adaptor (86).
1.
Please insert the plug of adaptor (86) to the jack (85) of chain guard.
2.
Please insert the plug of adaptor (86) to the jack of wall power
(230V~/50Hz).
Step 8:
Checks
1.
Check the correct installation and function of all screwed and plug
connections.
Installation is thereby complete.
2.
When everything is in order, familiarise yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
20

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1505Taxxon energy 1501

Table des Matières