Abnormal Operation - Haier HCR2250AGS Instructions D'installation

10. To adjust oven burner: The flame can be adjusted using the adjustment screw behind the
oven control knob.
If the low flame needs to be adjusted: Light bake burner and turn the oven control knob to the
lowest setting. Wait 5 minutes then remove knob. Insert a small, flat-blade screwdriver into
the adjustment screw, and slowly turn the screw until the flame appearance is correct.
• Open the valve more if the flames are too small or fluttered.
• Close the valve more if the flames are too large.
Replace Knob.
IMPORTANT: Once the conversion has been completed and has passed testing,
fill out the conversion sticker and include your name, organization and the date
conversion is made. Apply the sticker near the cooktop gas inlet opening to alert
others in the future that this appliance has been converted. If converting back to
Natural Gas, please remove the sticker so others know that the appliance is set to
use its original gas.

ABNORMAL OPERATION

ANY OF THE FOLLOWING ARE CONSIDERED TO BE ABNORMAL OPERATION
AND MAY REQUIRE SERVICING:
•
Yellow tipping of the hob burner flame.
•
Sooting up of cooking utensils.
•
Burners not igniting properly.
•
Burners failing to remain lit.
•
Burners extinguished by oven door.
•
Gas valves, which are difficult to turn.
IN CASE THE APPLIANCE FAILS TO OPERATE CORRECTLY, CONTACT THE
AUTHORIZED SERVICE PROVIDER IN YOUR AREA
35