Step 3 - Install Anti-Tip Bracket - Haier HCR2250AGS Instructions D'installation

NOTE: 24" model uses (2) screws and the 36" model uses (4) screws
24" Model
a
36" Model
a
3. Insert the two screws (one on each side) through the back edge of the
backsplash and into the cooktop. Tighten completely.

STEP 3 - INSTALL ANTI-TIP BRACKET

An Anti-Tip Bracket kit is provided with the range.
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death or serious burns
to children and adults.
IMPORTANT: Do not completely remove the rear leveling leg. The anti-tip bracket
uses either the right-hand or left-hand, rear leveling leg to secure the range to the
floor.
14
a
Backsplash -Back Edge
b
Backsplash - Bottom Edge
a
Backsplash -Back Edge
b
Backsplash - Bottom Edge
WARNING
Tip Over Hazard
b
b