Preparation; Connecting The Antenna - Aiwa TV-F2400U Mode D'emploi

PREPARATION

Connecting the antenna

Basic connections
AC cord hook
(TV-F2000 only)
2
To AC outlet
1
Connect the antenna cable to the ANTENNA connector on the TV.
If the cable is a round-type 75-ohm coaxial cable, connect it directly to the ANTENNA connector.
If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor (supplied), and connect the adaptor to
the ANTENNA connector.
2
Connect the AC cord to the AC wall outlet.
When you are using TV-F2000, connect the AC cord after passing it through the AC cord hook on the rear.
To prevent the unit from falling during earthquakes, etc.,
Fix the unit even to a wall or pillar with the security hook located on the rear using the strong twine or wire.
TV-F2000
TV-F2000
Security hook
Strong twine
or wire
(not supplied)
75-ohm
coaxial cable
(not supplied)
1
To ANTENNA connector
TV-F2400
CONTINUE
300-ohm twin-lead cable
(not supplied)
Antenna adaptor
(supplied)
Security hook
Strong twine
or wire
(not supplied)
4
ENGLISH