Preparing The Remote Control; Inserting The Batteries; Using The Remote Control; Setting The Language - Aiwa TV-F2400U Mode D'emploi

Preparing the remote control

Inserting the batteries

Caution
To prevent damage from leakage or explosion, follow
the descriptions below.
• Insert the two supplied R6 (size AA) batteries with the
0 and 9 marks correctly as illustrated.
• Do not mix old batteries with new ones or different
types of batteries.
• Do not throw the batteries into a fire, apply heat to
them or take them apart.
• Do not carry the batteries with keys or other metallic
objects.
Note
Remove the batteries when they have no more power, or when
you do not use the remote control for a long period of time.

Using the remote control

Point the remote control toward the remote sensor.
Remote sensor
Notes
• The remote control may not operate when there is any
obstruction between the remote control and the remote sensor.
• Strong ambient light sources such as a fluorescent lamp or
direct sunlight may cause unreliable operation.
• Using a TV with the same type of infrared remote control
facing the same direction may cause incorrect operation.
• The maximum distance for effective control between the
remote control and the remote sensor is 7 meters.
• Although you can use the remote control within an angle of up
to 30 degrees in any direction from directly in front of the remote
sensor, we recommend a narrower angle for stable operation.
7m
30˚ 30˚

Setting the language

The on-screen menu can display three languages:
English, Spanish and French.
MENU
TV/VIDEO/ VOLUME
+ /–
ENTER
1
Press POWER on the TV.
The STANDBY indicator on the TV lights in red.
2
Press POWER on the remote control to turn on
the TV.
The 6 STANDBY indicator turns off.
You can also turn on the TV with CHANNEL N or M
on the TV.
3
Press MENU.
4
Press CHANNEL N or M to select SET UP,
then press ENTER.
The selected item is displayed in red.
You can also use TV/VIDEO/ENTER on the TV instead
of ENTER on the remote control.
MENU
P CTURE I
SOUND
SET UP
V CH I P
SELECT: /
5
Press VOLUME + or – to display the desired
language.
Each time you press the button, the on-screen display
language changes.
SET UP
LANGUAGE
ANTENNA
AUTO SEARCH
ADD/ ERASE
CH CAPT I ON
SELECT: /
CHANGE: –/+
6
Press MENU to return to the normal screen.
POWER
MENU
VOLUME + /–
CHANNEL N/M
ENTER
POWER
CHANNEL
N/M
6 STANDBY
indicator
OK : ENTER
EX T : MENU I
: ENGL I SH
: CABLE
EX T : MENU I
8
ENGLISH