On-Screen Display - Aiwa TV-F2400U Mode D'emploi

5
Press CHANNEL M to select the bar display.
CH CAPT I ON
CABLE125
– – – –
RESET
/
SELECT:
CHANGE : – / +
6
Press VOLUME + to display the desired letter,
then press CHANNEL M .
Each press of VOLUME+ changes the display as
follows:
.....
A Z
.....
9
Press VOLUME – to change the display in reverse order.
CH CAPT I ON
CABLE125
N
RESET
SELECT:
CHANGE : – / +
7
Repeat steps 5 and 6 to enter a broadcasting
station name.
You can enter up to 4 letters.
8
To enter another broadcasting station name,
press CHANNEL M to move the cursor (red
area) to the channel number, then repeat steps
4 through 7.
You can enter up to 30 stations. When 30 stations are
already registered, "FULL" appears instead of "----."
9
Press MENU to return to the normal screen.
Tip
To cancel all letters in steps 6 and 7, press CHANNEL N or
M to select RESET, then press ENTER.
EX T : MENU I
& / –
0 (space)
– – –
/
EX T : MENU I

On-screen display

Broadcasting
station name
N B C
To change the on-screen function display
Press DISPLAY. Each press turns the display on/off.
Notes
• If no button is pressed for 8 seconds, the on-screen display
automatically turns off.
• The broadcasting station name appears only when the
station name is registered.
• Audio input indicator does not appear when the TV is in
VIDEO1 and VIDEO2 mode.
DISPLAY
Channel number/
C A B L E 1 2 5
VIDEO indicator
S T E R E O / S A P
Audio input
18
ENGLISH