Eu Declaration Of Conformity - Güde Profi S Mode D'emploi

controllable sprayer. The gun thus offers a broad range of
utilisation. The supply includes the Aluminium vacuum
container with a capacity of 1,000 cm

EU Declaration of Conformity

GB
We, Güde GmbH & Co. KG Birkichstraße 6, 74549 Wolpertshausen,
Germany, hereby declare the conception and construction of the
below-mentioned appliances correspond - at the type of construction
being launched - to appropriate basic safety and hygienic
requirements of EC Directives.
In case of any change to the appliance not discussed with us the
Declaration expires.
Marking of appliances: Profi S colour spray gun
Order No.: 40140
Date/producer signature: Jul 01, 2008
Signed by: Mr Arnold, Managing Director
Appropriate EU Directives:
EU 98/37/EG Directive
Harmonised standards used:
DIN EN 292
DIN EN 1953
Supply includes
Colour spray gun
Vacuum container
Nut wrench
Brush
Operating Instructions
Appliance description (pic. I)
1. Spray head
2. Air volume controller
3. Colour volume controller
4. Exhaust
5. Compressed air connection
6. Air pressure controller
7. Colour container
Guarantee
Guarantee claims as per guarantee card attached.
Important safety instructions
As a result of toxic fumes generated at application
of certain material there can be poisoning and serious
damage of health. Always use protective glasses, gloves
and a breathing mask to prevent possible poisoning with
fumes, solvents and colours that can get in touch with
your eyes and skin.
Do not in any case use oxygen, flammable or
other gases packed in bottles as an energy source, it
could cause an explosion or serious accidents of
persons.
Volatile matters or solvents can burn. Use the
appliance in well-ventilated rooms only and avoid each
inflammable source (e.g. smoking, open flame and
similar dangerous sources).
Disconnect the appliance from the pneumatic
hose before any maintenance, immediately after
appliance switching off, after unexpected operation drop-
out or preventively to avoid unexpected putting into
operation. It is recommended to mount a ball cock to the
gun near the connection of the air hose to the gun.
3
.
8
Clean, dry and controllable compressed air set to 3.0 to
4.0 bar is only used. Exceeding a maximum pressure of
8.3 bar (120 psi) is prohibited.
Never use solvents homogenised by hydrocarbon
reacting to aluminium and zinc parts and that can create
chemicals.
Before putting the appliance into operation, check
whether all screws and covers are tightened and whether
there are any untight connections.
Before applying colour, make sure the starter and nozzle
can freely move.
The colour spray gun needs to be used for purposes
designed only. Use solely spare parts (nozzles and
accessories) recommended by the producer.
Make sure the workplace was well ventilated at
varnishing!
Always wear protective clothing (protective
glasses, breathing mask, ear protectors)!
Do not aim the gun at other persons or yourself,
failing which there can be serious injuries.
Disconnect the gun in a pressureless state only,
any pneumatic hoses thrown off can cause serious
injuries.
Follow all safety instructions included in these Operating
Instructions, including icons in the "Marking" chapter,
instructions in the "Assembly and first putting into
operation" and "Maintenance and treatment"!
Behave responsibly towards other persons!
Qualification
Apart from the detailed instructions by a professional, no
special qualification is necessary for appliance using.
Minimum age
Persons over 16 years of age can only work on the appliance.
An exception includes youngsters trained in order to reach
knowledge under supervision of the trainer during
occupational education.
Training
Using the appliance only requires corresponding training by a
professional or the Operating Instructions. No special training
is necessary.
Technical data
Container capacity: 1 litre
Working pressure: 3-6 bar
Air consumption: 250l a min
Ø of nozzle: 1.8 mm
Junction thread: ¼ " IG
Weight: 1.5 kg