English
MAINTENANCE AND CLEANING
WARNING: Always disconnect from the mains power supply,
before carrying out any maintenance/ cleaning of the charger.
Remove the battery before carrying out any maintenance/clean-
ing of the tool.
Maintenance
There are no inner parts of the tool which need maintenance.
Cleaning
•
We recommend that you clean your electric power tool
immediately after each use.
•
Clean the electric power tool regularly with a damp cloth
and somewhat soft soap. Do not use any cleaning or sol-
vent materials; these can attack the device's plastic compo-
nents. Make sure that no water can get inside the electric
power tool.
TECHNICAL DATA
Spotlight . . . . . . . . . . . . . . . . . . . . . 9.2 V 3 W LED
LED Risk Group . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen . . . . . . . . . . . . . . . . . . . . . . . . . . 100 lm
Swivel Torch Head . . . . . . . . . . . . . . . . . . . 0° – 270°
Swivel Torch Head Stops . . . . . . . . 0, 45, 90, 135, 225, 270°
Angle Torch Head . . . . . . . . . . . . . . . . . . . 0° – 180°
Angle Torch Head Stops . . . . . . 0, 30, 60, 90, 120, 150, 180°
Dimensions . . . . . . . . . . . . . . . . . . 29.5 × 6.7 × 9 cm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3 kg
DISPOSAL
Do not dispose of electric power tools with domestic
refuse.
The electric power tool is shipped in packaging to
reduce transport damage. This packaging is a raw material and
as such can either be reused or can be fed back into the raw
material cycle. The electric power tool and its accessories are
12
made from various materials such as metals and plastics. Take
defective components to a special refuse collection point. Ask
about these at your specialist shop or local council. The product
and the user manual may be subject to changes. Technical data
may be changed without prior notice.
Batteries
Think of the environment when disposing of batteries. Contact
your local authorities to find out where your nearest disposal
area is.
Do not dispose of batteries with domestic refuse.
Do not dispose of by burning, risk of explosion.
EC-DECLARATION OF CONFORMITY
We, the Batavia GmbH, Weth. Buitenhuisstraat 2a, NL-7951
SM Staphorst, declare by our own responsibility that the prod-
uct Cordless Swivel Worklight, Model BT-CWL001, Item-No
7062509 is according to the basic requirements, which are
defined in the European Directives Electromagnetic Compatibil-
ity 2014/30/EU (EMC), 2011/65/EU (RoHS) and their amend-
ments. For the evaluation of conformity, the following harmo-
nized standards were consulted:
EN 55015:2013+A1,
EN 61547:2009
Staphorst, 04 February 2017
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
English
13