Table des Matières
Publicité
English
DEAR CUSTOMERS
Instruction manuals provide valuable hints for using your new
device. They enable you to use all functions, and they help
you avoid misunderstandings and prevent damage. Please
take the time to read this manual carefully and keep it for
future reference.
EXPLANATION OF THE SYMBOLS
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Denotes risk of personal injury, loss of life or damage
to the tool in case of non-observance of the
instructions in this manual.
CE stands for "Conformité Européenne", which
means "In accordance with EU Regulations". With
the CE marking, the manufacturer confirms that this
Electric tool complies with the applicable European
directives.
Do not dispose of electric power tools with domestic
refuse.
SAFETY WARNINGS FOR CORDLESS WORKLIGHTS
•
Read all safety warnings and all instructions. Failure to fol-
low the warnings and instructions may result in electric
shock, fire and/or serious injury.
CAUTION! Do not stare into the light beam for longer
periods. The optical radiation can be harmful for your
eyes.
•
Do not direct the light beam at persons or animals and do
not stare into the light beam yourself (not even from a
distance).
•
Do not point the beam at: cars, motorcycles, aircraft, ships
or any other vehicle or machinery that is operated by a
10
person. Bright light can be blinding and you could cause a
serious accident.
BEFORE FIRST USE
Remove the machine and the accessories from the packaging.
Check the machine for transport damage and do not use the
machine in case of damages. Keep the packing materials away
from children, risk of suffocation!
INTENDED USE
A general purpose LED worklight.
OPERATION
•
Switch the worklight on or off by pressing the On/Off Switch
(4).
•
Adjust the worklight (1) direction by turning the worklight (1)
at the Swivel Joint (2). It adjusts from 0 – 270° with 6 click
stop positions.
•
Adjust the worklight angle at the Angle Joint (3). It adjusts
from 0 – 180° with 6 click stop positions.
Note: Be careful not to damage the worklight when adjusting
the angle and swivel positions.
•
The worklight features a built in Hanging Hook (Fig. B).
Push upwards to release from the tool body.
•
The high capacity of the Li-Ion 18 V battery means the runt-
ime operating the worklight will exceed 12 hours for the
standard capacity 18 V 2.0 Ah battery. The very low self-dis-
charge rate of li-ion batteries means the worklight will be
available for use for many months before charging is
required.
English
11
Publicité
Table des Matières
