Facom V.DG300F Notice Originale page 11

PRECAUTIONS TO TAKE WHEN SANDING PAINT
1. Sanding of lead based paint is NOT RECOMMENDED due to the difficulty of controlling the contaminated dust. The greatest
danger of lead poisoning is to children and pregnant women.
2. Since it is difficult to identify whether or not a paint contains lead without a chemical analysis, we recommend the following
precautions when sanding any paint.
PERSONAL SAFETY
1. No children or pregnant women should enter the work area where the paint sanding is being done until all clean up is completed.
2. A dust mask or respirator should be worn by all persons entering the work area. The filter should be replaced daily or whenever the
wearer has difficulty breathing.
NOTE: Only those dust masks suitable for working with lead paint dust and fumes should be used. Ordinary painting masks do not
offer this protection. See your local hardware dealer for the proper NIOSH-approved mask.
3. NO EATING, DRINKING or SMOKING should be done in the work area to prevent ingesting contaminated paint particles. Workers
should wash and clean up BEFORE eating, drinking or smoking. Articles of food, drink, or smoking should not be left in the work
area where dust would settle on them.
ENVIRONMENTAL SAFETY
1. Paint should be removed in such a manner as to minimize the amount of dust generated.
2. Areas where paint removal is occurring should be sealed with plastic sheeting of 4 mils thickness.
3. Sanding should be done in a manner to reduce tracking of paint dust outside the work area.
CLEANING AND DISPOSAL
1. All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the sanding project. Vacuum
filter bags should be changed frequently.
2. Plastic drop cloths should be gathered up and disposed of along with any dust chips or other removal debris. They should be
placed in sealed refuse receptacles and disposed of through regular trash pick-up procedures. During clean up, children and
pregnant women should be kept away from the immediate work area.
GUARANTEE
Facom power tools are guaranteed for 24 months from the date of purchase against any defect or manufacturing fault.
Facom accessories and wear parts, charger and batteries are covered by the legally enforced guarantee.
This guarantee does not cover the following cases: normal wear, non compliance of instructions of use and safety guidelines, non-
conventional or abusiveuse of the tool, tool overloading, lack of servicing or maintenance, intrusion of foreign bodies, tools which have
been disassembled or modified, or featuring traces of shock (dents, cracks or broken covers...), use with poor quality or non compatible
accessories.
To use the guarantee, provide: the tool with its serial number as well as the legible and unmarked original invoice designating the pro-
duct and its date of purchase. Detailed conditions of application of the guarantee: call your distributor.
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER OUR
OWN RESPONSIBILITY THAT THE PRODUCTS V.DG300F/V.DGE300F/V.DGA305F/V.DGA310F – FACOM DIE GRINDERS
6MM 0.3HD
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD
EN ISO 11148-6: 2012
EN ISO 12100:2010
EN ISO 15744:2008
EN ISO 28927-2:2009
NU-V.DG300F V.DGE300F V.DGA305F V.DGA310F_0715M.indd 11
CE DECLARATION OF CONFORMITY
11
20.07.2015
QUALITY DIRECTOR
9/3/2015 3:24:48 PM