Silver SHBR 560 B1 Mode D'emploi page 22

Take hold of the bracket on the left side of the rotary brush
upwards to remove the rotary brush from the foot section
Fig. 33
Clean the splash guard
fig. 35).
If the brush chamber is dirty, wipe it out with a damp cloth or rag (see fig. 36).
Fig. 35
Allow the rotary brush
fitting them back onto the appliance (see fig. 37).
You can also place the rotary brush
the parking and cleaning station for drying (see Figure 38).
SHBR 560 B1
Fig. 34
7
and the rotary brush
Fig. 36
6
and the splash guard
6
upright in the rotary brush holder
6
and pull it
3
(see fig. 34).
6
in hot running water (see
7
to dry completely before
GB │ IE
5
on
│
19 ■