Handling And Operation; Continuous Spray Function; Cleaning Hard Floors - Silver SHBR 560 B1 Mode D'emploi

Handling and operation

ATTENTION! PROPERTY DAMAGE!
► While working with the appliance, make sure that the rotary brush
not get blocked by loose objects lying around on the floor or by carpet
edges. These can damage the rotary brush
properly.
NOTE
► Before finishing the cleaning process, use the appliance approx. 15
seconds without adding cleaning solution. This prevents larger amounts of
water residue being left behind and gives you a better cleaning result.
► A small amount of water may remain on the floor after cleaning for func-
tional reasons. In this case, remove the remaining water from the floor with
a cloth.

Continuous spray function

The appliance has a continuous spray function that allows you to continuously
apply cleaning solution to the rotary brush
cleaning solution switch
Press the cleaning solution switch
spray function.
Press the cleaning solution switch
continuous spray function.
Cleaning hard floors
Once the appliance is assembled and the fresh water tank
and cleaning solution:
Unwind the power cable
z/p
. To unwind the power cable
pull the upper cable retainer
fig. 12).
Insert the plug into the mains power socket.
SHBR 560 B1
6
without having to hold down the
t
:
t
twice briefly to activate the continuous
t
twice briefly again to deactivate the
u
completely from the upper and lower cable retainers
u
quickly from the cable retainers
z
out a little way and turn it downwards (see
6
and stop it from working
q
is filled with water
GB │ IE
6
does
z/p
,
│
11 ■