Care & Maintenance - Medela BabyWeigh II Mode D'emploi

Care & Maintenance
This is a precision manufactured and accurately calibrated product. Please
observe the following instructions.
1. Do not dismantle the scale housing. The baby tray may be removed by
following the instructions on page 9-12.
2. When not in use for a long time, unplug the AC adapter from the wall socket.
3. Remove the batteries before storing the equipment for long periods of time.
4. Do not wipe the equipment with corrosive chemicals. Use a neutral detergent
to clean the equipment. Do not spill water or chemical liquid on or in the unit.
The baby tray should be cleaned using Cavicide
disinfectant.
5. Avoid subjecting the equipment to excessive shocks or vibrations.
6. If an unauthorized person attempts to disassemble or repair any part of the
unit, the warranty will become invalid. If the unit malfunctions, please consult
your Medela sales consultant or customer service toll-free at 1-800-435-8316.
7. When disposing of this unit, please do so in accordance with local standards
for industrial waste.
Please observe the following instructions for accurate measurement.
1. Measurement may not be possible on a surface that is strongly vibrating. In
such cases transfer the equipment to a stable surface with little or no vibration.
2. If the scale is moved, and the new location has a temperature difference of
more than 20 °C (36 °F) please allow at least 2 hours before using.
3. While taking measurements, do not use mobile phones, microwave therapy
equipment or other types of transmitters near the scale as they may cause
interference.
4. Avoid scale placement near heating/cooling vents, heating appliances, areas of
high airflow or direct sunlight.
SAVE THESE INSTRUCTIONS
or commercially available
®
6