Romus RLM-70 Mode D'emploi page 17

Press this button to trigger the
measurement,
is displayed in the second line. At the
same time, the result is displayed in the
summary line, results in the secondary
line.
◦ Indirect measurement _ determining a distance using 3 measurements
see Figure (C)
Press this button
The laser is switched on. Aim at the upper point
(1) abd trigger the measurement. After the first
measurement the value is adopted. Keep the
instrument as horizontal as possible, the tools
default the measurement result as horizontal
value.
The dispaly shows the third line, Aim at the
lower point and Press this button to trigger the
measurement (3). The result is displayed in the
summary line, the third lines at same time.
◦ Historical storage
Continue press
calculated results) are shown in the reverse order.
Press to retrieve the next value of 20 records.
Press then retrieve the previous value of 20 records.
Press the then
one in the reverse sequence.
the measured
four times, the display
the next value of previous 20 records (measurements or
button to erases the value of historical storage one by
www.romus.fr
value
shows the following symbol.
Réf. 93257
17