Mi Drone Mini Mode D'emploi page 9

3. Installing and Disassembling the Protective Frame
Installing: Line up the protruding points on the protective frame with the sunken grooves
on the drone and insert them together. Tightly press both sides of the frame into place
a er the sunken grooves and protruding points have completely interlocked.
Disassembling: Lightly pull on the clip on one of the ends of the protective frame outwards
until the frame has separated from the inside of the drone, at which point the protective
frame can be fully removed.
Alignment of the protruding points of the protective
frame with the sunken grooves on the frame
Sunken grooves
on the frame