Mi Drone Mini Mode D'emploi page 7

Installing and Disassembling
1. Installing and Disassembling the Ba ery
Installing: Place the ba ery inside the drone's ba ery compartment and ensure that the
arrow on the cartridge is pointing in the same direction as the ba ery release. Press the
ba ery into place, making sure that both ends are firmly and tightly in place. There will be
a clicking sound as the ba ery is properly set into place.
Disassembling: Press down on the ba ery release bu on until the ba ery turns upwards.
Remove the ba ery.
Note: Ensure that you disconnect the device from any power sources and take out the ba ery
if you are not going to use it for an extended period of time.
Ba ery Release