Extel WECA 109057 Mode D'emploi Et D'installation page 19

Modifications of the entry code :
You can use part of or all the push-buttons to code the
opening through the handle.
No order in the numbering is requested.
At the back of the keyboard "fig. M" we can see the
elements extending the push-buttons of the keyboard.
"Dot" outwards = inactive push-button "fig. N"
"Dot" inwards = active push-button "fig. N"
In order a push-button is activated with the code, press
and turn its element so that the dot is turned inwards
(towards F), if you wish to deactivate a push-button, turn
the element outwards (towards G).
Check the code works properly before fixing the
assembly or closing the door.
ALWAYS PRESS THE KEY "C" BEFORE ENTERING THE CODE
3. CHECK THE OPENING DIRECTION OF YOUR DOOR
Use the diagram below and note the right and left terms refer to the position of the hinges by being
outside whether the door opens inward or outward.
Use the surface-mounted strike for doors which open inward.
Left hand
Use the flush-mounted strike for doors which open outward.
G
6
7
8
9
0
Z
C
fig. N
Inside
Outside
3EN
fig. M
F G G
1
2
3
4
5
X
Y
Right hand
F G
1
6
2
7
3
8
4
9
5
0
X
Z
Y
C
fig. O