Input Select Switch - Oehlbach XXL DAC Ultra Mode D'emploi

Connections
Analogue audio outputs:
Analogue audio inputs:
Digital audio inputs:
Power supply:
Operating elements
Power:
Press the Power switch to turn the unit on or off. The blue LED on the front of the unit will illuminate
when it is switched on..
Phones Level:
Connect your headphones to one of the headphone jacks (PHONE 1 or PHONE 2) and use the PHONES
LEVEL control to slowly increase the playback level.

Input select switch:

Set the input select switch to your desired source (COAXIAL, OPTICAL, USB or ANALOG).
Installing the driver software for Windows/PC systems
In order to be able to use the Oehlbach XXL DAC Ultra to play audio files stored on your computer, you
will first need to install the special driver software from the supplied driver CD (the latest drivers can also
be found at www.oehlbach.com).
The Oehlbach XXL DAC Ultra can be connected via USB to a computer that is running Windows XP,
Windows Vista or Windows 7. Trouble-free operation cannot be fully guaranteed for other operating
systems.
To install the driver software on your PC, first connect the Oehlbach XXL DAC Ultra to your PC via USB
cable. Switch on the Oehlbach XXL DAC Ultra and start the installation process by double-clicking
„Setup.exe" on the the driver CD. When installation is complete, please reboot your PC. You will now be
able to use the Oehlbach XXL DAC Ultra.
Installing the driver software for Mac systems
The Oehlbach XXL DAC Ultra can be connected via USB to a computer that is running Mac OS X 10.6.4
or above. Trouble-free operation cannot be fully guaranteed for other operating systems.
It is not necessary to install the driver for Mac systems. The device should be detected automatically.
2 x 6.3 mm jacks (front), 1 x RCA stereo jack R/L (rear)
1 x RCA stereo jack R/L (rear)
1 x USB-B, 1 x optical (Toslink), 1 x coaxial (RCA)
1 x DC12V input
XXL DAC Ultra
9