Logitech FLIGHT MULTI PANEL Guide De L'utilisateur page 6

USING THE LOGITECH G FLIGHT MULTI PANEL
Button Autopilot function
AP Master switch to engage or disengage the autopilot
HDG Plane will fly to selected compass heading
NAV Plane will fly to selected NAV1 frequency or GPS
IAS Plane will fly at selected indicated airspeed
ALT Plane will fly to and maintain selected altitude
VS Plane will climb or descend at selected vertical speed
APR Plane will fly on approach to runway localizer
REV Plane will fly on a back course from the localizer
ADJUSTING AUTOPILOT SETTINGS
To change the values of the autopilot settings, first turn the selector switch on the left
side of the Multi Panel to the function you want to adjust. Turn the rotary control
to the right of the LED display to increase or decrease the values for the function
you have selected.
For example, if you want to adjust the altitude setting, first turn the selector switch
on the left to ALT and then increase or decrease the desired altitude setting using
the rotary controls on the right.
To engage any of the autopilot functions, first select the function, e.g., HDG, NAV,
etc., and then press the autopilot master switch.
6 English