Aiming The Camera When Mounted With The Thread Mount; Low Light Function; Downloading Videos; Wi-Fi - Midland XTC450 Guide D'utilisation

Aiming the Camera when mounted with
the thread mount:
When mounting the camera on a thread mount, follow these steps:
1. Consider what you would like to shoot and mount accor-
dingly.
2. Ensure, once attached, that the camera is aimed straight
and not toward the ground or at the sky.
3. If needed, rotate the lens to maintain an upright viewing
angle
4. To see where your camera is aimed, enable Wi-Fi and use
your smartphone with the app as a viewfinder.

Low Light Function

The low light function allow the user to take video also in
low light conditions.
To activate the function move the related switch to the L
position. To deactivate the function move the switch to the
N position.

Downloading Videos

There is no need to install any software with the XTC450.
It is a plug and play device. To download video, follow the
instructions below depending upon whether you have a PC
or a MAC. Downloading Videos on a PC with a WINDOWS
Operating System
Midland XTC450 - 18
1. Connect the camera to the computer using included
micro USB cable.
2. Ensure the record switch is in the OFF position
3. Double click "My Computer" and locate "Removable Disk."
4. PC:
a. If "Removable Disk" is not showing, close "My Com-
puter" folder and reopen it. The "Removable Disk" icon
should appear.
b. Open the "Removable Disk" icon.
5. MAC
a. MAC should automatically recognize the camera
external hard drive.
b. Click on the icon on the desktop.
6. Open the "DCIM" folder icon.
7. Open the "100MEDIA" icon.
8. Your videos will be in this folder.
Note: the camera will generate two clips for each video, one
in the selected resolution and the other in low res. (.tmb)

Wi-Fi

Note: The Wi-Fi doesn't turn ON if the MicroSD isn't inserted.
The XTC450's built in Wi-Fi allows you to connect and con-
trol the camera using a smartphone or tablet.
1. Toggle the Wi-Fi switch inside the back cover to the ON
position.