Before The First Use - Tristar IK-6176 Mode D'emploi

Before the firSt uSe

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz)
Suitable Pan Ware
• Note: check before you start coocking whether the pan you use is
suitable for induction cooking.
• Materials: iron, stainless steel, iron cast and heat-resistant glassware
with magnetic inductive layer.
• Form: pan with flat round bottom (the diameter of the flat bottom shall
be larger than 12cm. and not bigger than 20cm.)
unsuitable Pan Ware
• Materials: Nonferrous metal, ceramics, glass, pan with bottom as
copper or aluminum (multi-layer metal pan).
• Form: Pan with very uneven bottom, pan with bottom diameter less
than 12 centimeters.
uSe
• Connecting to power supply: Insert the power plug into the power
socket of AC230V/10A. When you hear a "Beep" from the buzzer and
the display show "OFF", it means the power is connected and the
appliance is in the standby status.
• Placement of the pan: place the pan and put food to be cooked in the
pan directly and then put the loaded pan at the center position of the
heating panel of the appliance.
• Cooking based on wattage: press the ON/OFF switch to turn on the
appliance, the display will show "on" then push the "function" button,
the power indicator will illuminate, now the electromagnetic oven is in
the power heating status. The display will show " 1600", use the wheel
to adjust from 200W to 1800W, now you can push the timer button,
the timer indication light will illuminate and the display will show 0:00,
use the wheel to adjust the time setting.
• Cooking based on temperature: press the ON/OFF switch to turn on
the appliance, the display will show "on" then push the "function"
button twice the power indicator will illuminate, now cooker is in the
temperature heating status. The display will show "240" , use the wheel
to adjust from 60 degree to 240 degree, now you can push the timer
button, the timer indication light will illuminate and the display will
show 0:00, use the wheel to adjust the time setting.
• When ready, the display of the timer will shut down, it means heating
has been stopped. But the cooling fan will keep running for 1 minute
to cool down the appliance. The cooling fan would be stopped
automatically after 1 minute. If you want to unplug the power plug,
you have to do this after the cooling fan stopped.
• LOCK function , press lock function button to lock the control panel. To
unlock the control panel touch the lock button for 5 seconds.
Induction cooking plate
EN
5