Technical Specifications - EuroLite Strobe-Spot Mode D'emploi

For the installation, you need one flashtube U-shape.
During the operation, the lamp reaches temperatures of up to 200° C.
Procedure:
Step 1: Unscrew the fixation screws of the protective shield.
Step 2: Remove the protective shield.
Step 3: Remove the old lamp from the lamp-socket.
Step 4: Insert the new flash-tube into the lamp-socket.
Step 5: Replace the protective shield and tighten the screws.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Flash-rate:
Dimensions (LxWxH):
Weight:
Fitting lamp:
Flashtube U-shape without base
Maximum ambient temperature t
Maximum housing temperature t
Please note: Every information is subject to change without prior notice. 17.08.2004 ©
Only operate this device with fixed protective shield!
220-250 V AC, 50 Hz ~
15 W
5 Hz
160 x 100 x 100 mm
300 g
No.:
85012000
: 45° C
a
90° C
(steady state):
B
16/28 52200800_V_2_0.DOC