Arcora ANIKO70 Manuel D'utilisation Et De Maintenance page 12

Continuous flow
Pump activated
from the RIGHT
handle
Brush adjustment lever
LEFT Handle
Preparation for Work as a self-contained machine for carpet
1. Fill in the lower tank (solution tank) with cold or warm water, through the filling hole, adding a 5%
of not-foaming detergent (1/2 liter each 10 liters). If the machine is equipped with the optional
SMARTKIT, it is possible to put in the tank just clean water and keep separate the chemical
bottle. See the specific manual for more details.
Attention: wool carpet must be washed with cold water only!
2. Insert the plug of the cable into a wall socket (see Safety Regulations).
3. Set to position "I" the switches of the vacuum motor, the pump and the rotating brush.
4. Set the spray selector to maintenance cleaning (
5. Adjust the pressure of the brush, acting on the brush adjustment lever.
Control panel and handle
BRUSH
VACUUM
I I
O O
O
I I
I
12
CHEMICAL
RIGHT Handle
) or deep cleaning position (
Selector:
Chemical /
Maintenance /
Deep Cleaning
).