Operating Modes - Zonair3D AIR MOVE + Guide Rapide D'utilisation

Operating modes

AUTO MODE: the purifi er automatically adjusts
the fans, to a higher or lower setting, according to
the indoor air quality detected by the sensor.
SILENT MODE: the purifi er works constantly but
on the lowest setting and with minimum sound.
BOOST MODE: the purifi er works constantly on
the highest setting to accelerate purifi cation of the
air in the space.
The air quality sensor remains active and
constantly checks the air quality condition. The
air quality indicator shows the quality of the
air inside the vehicle in real time (and relates the
colour to its classifi cation in the Frequently Asked
Questions table).
Every time you change the operating mode with
the ON/OFF switch, you will hear a beep and the
corresponding indicator on the control panel will
light up.
Whenever the purifi er is switched on, a blue
ambient light will illuminate on the outlet vent,
regardless of the operating mode.
Operation
Installation and connection of Air Move +
Location and installation:
Pass the straps through the holes located in the base of the
1
purifi er, as shown in the image.
Install the purifi er:
2
· On the central or rear armrest console or on the headrest.,
tightening the straps as much as possible to prevent any
movement.
· Under the front seat.
Connect the power cable to the 12V car cigarette lighter socket.
3
IMPORTANT: the power cable included with the AIR MOVE + is
only suitable for use with 12V DC outlets.
AIR MOVE + · 11