Features; Assembly; Operation - Ryobi P450 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Belt Size ..............................................................................................................................................................3 in. x 18 in.
Sanding Surface ....................................................................................................................................................16.5 sq. in.
No Load Speed .................................................................................................................................................... 850 ft./min.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.

FEATURES

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.

OPERATION

APPLICATIONS
You may use this product for the purposes listed below:
 Sanding wood, metals, plastics, and other materials
 Smoothing rough boards, chamfering, rounding edges
 Removing rust, paint, varnishes, and stains
WARNING:
Always remove the battery pack when attaching,
changing, or adjusting sanding belts. Failure to do so
could cause accidental starting, leading to serious
personal injury.
TURNING THE SANDER ON/OFF
See Figure 1, page 10.
To turn the sander ON:
 Insert the battery pack.
 Depress the switch trigger.
To turn the sander OFF:
 Release the switch trigger.
LOCK-ON BUTTON
See Figure 1, page 10.
The lock-on feature allows you to lock the switch trigger in
the ON position. Locking the switch trigger on allows you to
operate the sander for extended periods of time.
If you have the lock-on feature engaged during use and the
battery pack is removed from the sander, disengage the
lock-on feature immediately. Also, do not lock the switch
trigger if you might need to suddenly stop the sander.
5 — English