Symbols; Features - Ryobi P610 Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
No Hands Symbol
Recycle Symbols
V Volts
min Minutes
Direct Current
No Load Speed
n o
.../min Per Minute
PRODUCT SPECIFICATIONS
No Load Speed ................................................ 10,000/min.
Planing Width ............................................................... 2 in.

SYMBOLS

MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Do not expose to rain or use in damp locations.
Failure to keep your hands away from the blade will result in serious
personal injury.
This product uses nickel- cadmium (Ni-Cd) and lithium-ion
(Li-ion) batteries. Local, state, or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your local waste authority for
information regarding available recycling and/or disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute

FEATURES

4 — English
DESIGNATION/EXPLANATION
Planing Depth .......................................................... 1/64 in.
Rabbet Depth .........................................................0-1/2 in.