Nuface FIX Appareil Lissant Manuel D'utilisation page 6

T R E AT M E N T A R E A S
There are four (4) recommended treatment areas:
TREATMENT AREA
Eyes
Mouth
Forehead
Nasolabial Folds
G E T T I N G STA R T E D
GET READY TO PLUMP, SMOOTH, AND TIGHTEN.
The instructions below are designed to provide the most
effective results when followed correctly.
1) Select a preferred treatment area.
2) Cleanse the selected treatment area with an oil-free cleanser.
Any cream, lotion, self-tanner and/or oil-based products on
the skin can block the microcurrent.
Note: Hair in the treatment area can conduct microcurrent
energy from the spheres creating a tingling sensation.
3) Apply a mask-like layer of NuFACE FIX™ Line Smoothing
Serum on the selected treatment area.
Important: Always apply NuFACE FIX Serum when using your
FIX Device. Apply more serum if skin becomes dry during
treatment to avoid any uncomfortable sensation.
4) Unplug the Micro USB Cable from your FIX Device.
5) Turn ON your FIX Device by pressing the ON/OFF button;
the white LEDs will illuminate and the energizing hum will begin
when the device is ON.
6) Begin treatment by using the recommended technique
shown. Refer to your Quick Start Guide for additional
illustrations.
7) You can treat one or more treatment areas for the full
3-minute cycle. Tap in remaining NuFACE FIX Serum into skin
for additional skincare benefits.
8) Your FIX Device will automatically turn OFF after 3 minutes
to indicate your treatment is complete.
Note: Manually turning OFF your FIX Device will end
the current treatment. When FIX Device is turned ON again,
the device will start a new 3-minute treatment cycle.
See the "Caring for Your Device" section for proper
cleaning instructions.
Note: Do not immerse FIX Device in water at any time.
6
CONCERNS
Crow's Feet, Under Eye Fine Lines
and Puffiness
Vertical and Horizontal Lines
Horizontal Lines
Vertical Lines
T R E AT M E N T T E C H N I Q U E S
Ensuring that both spheres are in contact with the skin, apply
light to medium pressure while using the FIX Device feathering
technique. This quick erasing motion delivers bursts of NuFACE
microcurrent energy to help plump, smooth, and tighten skin.
Horizontal
Gliding Motion Gliding Motion
N u FAC E F I X L I N E S M O OT H I N G S E R U M
The essential first step to your microcurrent treatment
to ensure optimal results.
Important: Always apply FIX Serum when using the FIX Device.
Refer to serum packaging for use by date.
T R E AT M E N T D U R AT I O N A N D F R E Q U E N C Y
• The FIX Device may be used up to 2 times a day per
treatment area, 5 days a week.
• Can be used as the finishing step to your NuFACE Trinity
or mini treatment.
Note: The FIX Device will automatically turn OFF after the
3-minute treatment cycle is complete.
R E S U LTS
Results may vary based on skin type and skin condition.
Best results are achieved with regular use.
C A R I N G F O R YO U R D E V I C E
CLEANING
Use a slightly damp, soft, lint-free cloth. Wipe off any excess
serum on the FIX Device and the spheres. Use rubbing alcohol
or alcohol wipes to disinfect your FIX Device after each
treatment and before using on another person.
Do not immerse device in water or any liquid at any time.
CHARGING YOUR DEVICE
Before first use, charge your FIX Device for 4 hours.
After being fully charged, the device shall operate for up to
40 full 3-minute treatment cycles.
Note: If you lose your charger, contact NuFACE Client Services
at 1-888-360-9171 for information on purchasing the right cord.
Vertical Circular
Motion
®
®
7