CombiSteel 7227.0005 Mode D'emploi page 22

Replacing the Light Bulb Using the Inner Ring Opener:
•
Make sure the range hood is unplugged or turn OFF breaker.
•
Make sure the lights are cool to touch, carefully align the arrow on the inner ring with the arrow on the
outer ring where it says OPEN with the Inner Ring Opener as shown in Figure 1.
•
The inner ring will loosen and the light bulb will be available for removal as shown in Figure 2.
•
Install a new light bulb and reverse the steps.
•
Turn ON breaker and range hood to test for operation.
Replacing LED Light Fixture:
•
This range hood uses LED light fixture: 3W Max 12V LED
•
Make sure the range hood is unplugged or turn OFF breaker and the lights are cool to touch.
•
Place a flat-head screwdriver between light housing and hood body, gently pry up the light housing and
search for the metal clip.
•
Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and discard the
old light fixture.
•
Reverse the steps to install a new halogen light fixture. Turn ON breaker and range hood to test for
operation.
www.combisteel.com
22