Vibration And Noise Reduction - Parkside PAH 1700 C4 Instructions D'utilisation Et Consignes De Sécurité

Service
1)
Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Hammer safety warnings
1. Wear ear protectors. Exposure to noise
can cause hearing loss.
2. Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury. Firmly tighten the auxiliary
handle. Hold the power tool firmly with both
hands while working and keep proper footing
and balance at all times. The power tool is
always securely guided with both hands.
3. Hold power tool by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden wiring
or its own cord. Cutting accessory
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
4. Use appropriate detectors to determine if
utility lines are hidden in the work area.
Contact with electric line can lead to fire or
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line can
bring property damage.
5. Wear a dust mask. Dust from materials
such as lead-containing coating, wood,
mineral and metal can be harmful to people
health and cause allergic reaction, lead to
respiratory infection or cancer. Material
containing asbestos can only be worked
by qualified people. It is recommended to
observe the relevant regulation of the material
to be worked in your country before working
and wear respirator (P2 filter class) when
working.

Vibration and noise reduction

To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as well
as wear personal protective equipment.
Take the following points into account to minimise
the vibration and noise exposure risks:
Only use the product as intended by its
design and these instructions.
Ensure that the product is in good condition
and well maintained.
Use correct accessory tools for the product
and ensure they are in good condition.
Keep tight grip on the handles / grip surface.
Maintain this product in accordance with
these instructions and keep it well lubricated
(where appropriate).
Plan your work schedule to spread any high
vibration tool use across a longer period of
time.
GB/IE 25