Product Familiarisation; Intended Use - Triton SJA420 Instructions D'utilisation Et Consignes De Sécurité

Product Familiarisation

1. Tray
2. Support Arm
3. Pivot Knob
4. Spacer
5. Folding Arm
6. Stop
7. Mounting Knob

Intended Use

This Triton Tool Tray / Work Support is compatible with Triton SuperJaws
SJA200, SJA300 and SuperJaws XXL. Tray is suitable for keeping tools, spare
parts or other items close to hand. It also provides additional support for large
workpieces.
Unpacking Your Product
• Carefully unpack and inspect your Product. Fully familiarise yourself with
all its features and functions
• Ensure that all parts of the product are present and in good condition
• If any parts are missing or damaged, have such parts replaced before
attempting to use this product
Guarantee
To register your guarantee visit our web site at
tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated
otherwise) for information on future releases. Details provided will not be
made available to any third party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: SJA420 Retain your receipt as proof of purchase
Before Use
1. Unfold the Folding Arms (5) and rotate the Mounting Knobs (7) so that they
are squared up with the ends of the arms
2. Feed them into the first set of mounting holes in the side of the SuperJaws
and push them until the Stops (6) locate against the SuperJaws body
Note: The Tool Tray / Work Support can be fitted to the left- or right-hand side
of the SuperJaws.
3. Rotate the Mounting Knobs 45˚ to lock them in position
4. Locate the Tray (1) between the Folding Arms
Note: If fitting a second Tool Tray / Work Support to your SuperJaws, fit it to
the next series of mounting holes on the opposite side to the first Tool Tray /
Work Support.
Note: If using SuperJaws with the jaw reversed (wide clamping position), the
Support Arm (2) can be positioned higher so that it is level with the base of the
moving jaw. Loosen the Pivot Knobs (3) until the Spacers (4) can be separated
and the top Spacer rotated 90˚. Re-tighten the Pivot Knobs.
Triton Precision Power Tools guarantees to the purchaser of this
product that if any part proves to be defective due to faulty materials or
workmanship within 3 YEARS from the date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of
charge.
This guarantee does not apply to commercial use nor does it extend
to normal wear and tear or damage as a result of accident, abuse or
misuse.
* Register online within 30 days.
Terms & conditions apply.
art pr This does not affect your statutory rights oves to be defecti