Publicité
Les langues disponibles
Les langues disponibles
DE
Ziehen Sie nach der Montage aller Teile bzw. Elemente alle
Schrauben fest, richten Sie die Füße aus und installieren Sie
die Kabelsteckdose (S)
Wartung
1.
Reinigen Sie das Produkt regelmäßig mit einem
milden Reinigungsmittel und Wasser.
2.
Verwenden Sie aus Sicherheitsgründen nur ein nicht
brennbares Reinigungsmittel.
3.
Lassen Sie Wasser oder andere Flüssigkeiten nicht
lange auf dem Produkt bleiben.
4
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Product name
Model
Maximum load [kg]
Maximum load of the tool
board [kg]
Drawer dimensions [mm]
Drawer maximum load [kg]
Dimensions [mm]
Weight [kg]
LEGEND
Read instructions before use.
USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms "device" or "product" are used in the warnings
and instructions to refer to WORK BENCH.
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
It is recommended to have a floor area of at least 2x2
m at your disposal during installation.
c)
The product should be assembled or moved by at
least 2 adults to avoid personal injury.
d)
Do not leave children unattended near the product.
e)
Do not stand on the product or lean against drawers
or a table top.
f)
Use safety glasses when disassembling or removing
guides. The device may slip, which may result in injury.
g)
Do not modify the product in any way. Doing so may
damage the product, cause personal injury or death.
h)
Do not exceed the permissible load of the product.
i)
Be careful when opening more than one drawer. The
product may become unstable and overturn, causing
damage or injury.
j)
There is a high risk of overturning if the product is
not assembled correctly. Please securely attach the
product to the wall to avoid serious injuries.
k)
Keep packaging elements and small assembly parts in
a place not available to children.
l)
Only the manufacturer's service centre may make repairs
to the product. Do not attempt to make repairs yourself!
m)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
Rev. 02.02.2021
Rev. 02.02.2021
ASSEMBLING THE EQUIPMENT
ATTENTION! This product's exploded view can be
Parameter value
found on the last pages of the operating instructions
WORK BENCH
(pp. 13-14).
MSW-WBHD-02
Description
Element's name
680
A
Table top
227
B
Angle iron „L"
C
M8x65 hex bolt
830x292x80
D
M8x16 socket cap
35
E
Leg
1220x510x950/1762
F
Bracket
34
G
Adjustable leveling foot
H
Compartments
I
Drawer handle
J
Drawer
K
M8 nut
L
Tool board bracket
M
Tool board
N
Top shelf
O
M6 nut
P
M6x12 socket cap
R
M5x12 screw
S
Cable outlet
CAUTION! Do not fully tighten the bolts before the last
assembly step.
1.
Attach the legs to the table top.
2.
Attach the bracket to the legs and adjustable feet.
3.
Assemble the drawer handle and compartments.
CAUTION! Turn the table around by at least 2 people.
4.
Assemble the tool board brackets.
5.
Assemble the tool board.
6.
Assemble the top shelf on the brackets.
After assembling all elements, tighten all bolts, level the
feet and install the cable outlet (S).
Maintenance
1.
Clean the product regularly with a mild detergent and
water.
2.
For safety reasons, only use a non-flammable cleaning
agent.
3.
Do not allow water or other liquids to remain on the
product for a long time.
EN
Quantity
1
8
16
16
2
1
4
2
1
1
16
2
2
1
4
18
2
2
5
Publicité
