Sony PSS-650P Manuel D'installation page 9

English
CAUTION
This installation manual is for Sony dealers.
This manual shows the correct handling of the projector
ceiling mount and important precautions necessary to
prevent accidents. Be sure to read this manual
thoroughly and to do the installation work safely. Keep
this manual available for future reference.
For customers
Sufficient expertise is required for installing this
projector ceiling mount. Be sure to subcontract the
installation to Sony dealers or licensed contractors and
pay special attention to safety during the installation.
For dealers
Sufficient expertise is required for installing this
projector ceiling mount. Be sure to read this manual
thoroughly to do the installation work. Sony is not liable
for any damage or accident, such as falling, etc., caused
by mishandling or improper installation. Please give this
manual to the customer after installation.
The PSS-650P is an extension pipe for the PSS-650
Projector Suspension Support. Do not use this product
for any other purpose.
For the customers in the U.S.A.
SONY LIMITED WARRANTY - Please visit
http://www.sony.com/psa/warranty for important
information and complete terms and conditions of
Sony's limited warranty applicable to this product.
For the customers in Canada
SONY LIMITED WARRANTY - Please visit
http://www.sonybiz.ca/pro/lang/en/ca/article/
resources-warranty for important information and
complete terms and conditions of Sony's limited
warranty applicable to this product.
For the customers in Europe
Sony Professional Solutions Europe - Standard
Warranty and Exceptions on Standard Warranty.
Please visit http://www.pro.sony.eu/warranty for
important information and complete terms and
conditions.
For the customers in Korea
SONY LIMITED WARRANTY - Please visit
http://bpeng.sony.co.kr/handler/BPAS-Start for
important information and complete terms and
conditions of Sony's limited warranty applicable to
this product.
Table of Contents
Supplied Parts ..................................................... 10
Assembly .............................................................. 10
Adjusting the Height ........................................... 11
Using Cut Pipes ............................................... 11
Increasing the Adjustment Range .................... 12
Attaching Other Accessories .............................. 13
Attaching the Fall Prevention Wire .................. 13
Attaching the Wiring Covers ........................... 13
Attaching Tension Wires .................................. 13
Specifications ....................................................... 13
GB
9