geo-FENNEL FTI 300 Mode D'emploi page 31

BLENDING FUSION FUNCTION
The camera is equipped with the blending fusion function (PIP) for blending of the visible image with
the infrared image (0 to 100 %). This function allows an optimized orientation in the pictures. This func-
tion makes it fast and easy to locate hot spots in the area to be measured.
· Frame the area to be measured.
· Set the percentage of blending (0 to 100 %) with UP and DOWN.
0 %
SET THE PARALLAX CORRECTION
The different position of the IR sensor and the camera will cause a parallactic displacement (parallax).
This may lead to distortation of the measurement/image result at short distance up to 3 m. Beyond that
distance there is no more impact.
When taking measurements in the immediate aera up to 3 m the parallax correction value should be
set. The steps are 0.5 m, 1 m, 2 m, 3 m.
Set the distance to the object to be measured with the buttons RIGHT and LEFT.
25 % 50 % 75 % 100 %
EN
31