Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ACR5 Callouts
1
3
18
19
20
1.
GUITAR INPUT - 1/4" phone jack for connecting instruments with passive or
active pickups.
2.
Guitar VOLUME - Control knob is used to control the overall level of the GUITAR
INPUT channel.
3.
MIC/LINE IN - XLR+1/4" combo input connector for connecting a low impedance
microphone or line level device.
4.
MIC/LINE VOLUME - Control knob is used to control the overall level of the MIC/
LINE IN channel.
5.
CONTOUR Switch - Pressing this switch engages a mid scoop curve to the Guitar
channel which makes the amplifier sound more natural when plugging an elec-
tric instrument to the ACR5, or allows an acoustic guitar to cut through the mix
by suppressing the mids and accentuating the highs.
6.
BASS Control - This control is used to adjust the low frequency response. As it is
turned clockwise the frequency area is boosted; as it is turned counterclockwise
the frequency area is attenuated.
7.
MID Control - This control is used to adjust the mid frequency response.
8.
TREBLE Control - This control is used to adjust the high frequency response. As it
is turned clockwise the frequency area is boosted; as it is turned counterclock-
wise the frequency area is attenuated.
9.
CHORUS Send - Control knob used to set the amount of chorus effect on a
channel that is mixed with the channel's input signal. As the control is rotated
clockwise, the amount of the effect is increased.
6
TOP PANEL
2
5
6
7
4
6
7
8
REAR PANEL
21
8
9
10
11
9
10
12
13
14
15
17
16
22
23 24
25
Publicité
Table des Matières
