Alecto BC-20 Mode D'emploi page 19

USAGE
Pressing buttons:
To prevent unwanted power-on or power-off, the buttons must be pressed fi rmly. You will
feel a click when a button is pressed correctly.
Power-on:
1. Press button on / off. The display fl ashes for a couple of seconds.
2. As soon as the display readout is
lights, the scale is ready for use.
Weighing:
1. Power-on the scale as described previously.
If a towel is put on the scale and the display show its weight, press the on / off
button again to reset the display to
2. Put the baby in the centre of the scale.
3. As soon as the scale fi nished measuring, the display readout starts fl ashing and
shows the weight of the baby.
Power-off:
1. Press on / off key for 4 seconds to power-off the scale.
To safe batteries, the scale will switch-off automatically after 5 minutes of no use.
Memory:
The last measured weight is automatically stored in memory. Use this memory for
example to compare the weight of your baby before and after feeding.
1. The display must show
2. Press button mem.
3. The last measured weight is displayed, including the word [ mem ] in the right down
corner of the display.
4. Press again to return to the weighing mode.
Pay attention to fi rst read the memory before making a new measurement. Every new
measurement is automatically stored in memory, erasing the former stored weight.
and in the down left corner the word [ ZERO ]
.
.
19
GB