Operating Your Appliance - AVG AFV060W Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION INSTRUCTIONS (
LEVELLING
If the unit is not leveled, the doors may not close or seal properly, causing cooling, frost, or moisture
problems. It is very important for the unit to be level in order to function properly. To level your unit, you
may either turn the level leg clockwise to rise the unit – clockwise to lower.

OPERATING YOUR APPLIANCE

USING YOUR FREEZER
When using the freezer for the first time or after defrosting, turn the temperature control to setting MAX
for at least two hours before introducing the food to be stored. Let the freezer cool overnight before
adding large amounts of unfrozen food. Never add more than 2-3 pounds of unfrozen food per cubic
foot of freezer space.
All frozen food products you purchase should be placed in the freezer as soon as possible to avoid the
frozen food from defrosting.
To obtain the best possible results from your appliance, it is important that you know how the mechanism
works.
TEMPERATURE SETTING
Plug on your appliance. The internal temperature is controlled by
a thermostat. There are 3 settings: MIN, NORMAL and MAX.
MIN is warmest setting and MAX is coldest setting.
The appliance may not operate at the correct temperature if it
is in a particularly hot or if you open the door often.
NOTES:
urning the temperature control to the "OFF" position stops the cooling cycle but does not shut off the
T
power to the freezer.
If the unit is unplugged, has lost power or is turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the freezer will not start.
Large amounts of food will also lower the cooling efficiency of the appliance.
)
CONTINUED
22

Publicité

Chapitres

Table des Matières
loading

Table des Matières