Reversing The Door - AVG AFV060W Manuel D'utilisation

INSTALLATION INSTRUCTIONS (

REVERSING THE DOOR

Tool required: Philips screwdriver, flat-bladed screwdriver, hexagonal spanner
 Ensure the unit is unplugged and empty.
 To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on a solid
surface so that it will not slip during the door reversing process. Do not lay the unit flat as this may
damage the coolant system.
All parts removed must be saved to be reused for reinstallation of the door.

 We recommend that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove the top cover and the thermostat know, then place
it aside.
3. Unscrew top hinge and then remove door. Place it on a
soft, padded surface to avoid scratching.
4. Unscrew bottom hinge. Then remove the adjustable feet from
both sides.
)
CONTINUED
20
.