How To Disassemble And Reassemble The Cover Plate And Seal Ring; Help, Something's Gone Wrong - BOJ PC-1100-5 Manuel D'utilisation

English
4. Use sponge or non-metal brush to clean the inner bowl and wipe dry.
5. Use a tiny brush to clean air-out vent and pressure-limiting valve.
HOW TO DISASSEMBLE AND REASSEMBLE THE COVER PLATE AND SEAL RING FOR
CLEANING
Note: Ensure the cooker is switched off before disassembling.
When the cooker lid
is open, unscrew the
fixed nut and remove
the cover plate.

HELP, SOMETHING'S GONE WRONG!

PROBLEM
The lid of the Induction
Pressure Cooker is hard to
close.
The lid of the Induction
Pressure Cooker is hard to
remove.
There is air leaking from the
cover.
Remove the seal
ring from the rim of
the cover plate and
wash both the cover
plate and seal ring
using water and mild
detergent. Ensure
the pressure floater
moves freely and
exhaust valve inlet
are clean and free of
residue build up.
POSSIBLE CAUSE
The lid may be placed
improperly on the appliance.
If the seal ring is properly
placed, the pressure float may
be stuck.
If the lid is hard to remove, the
float valve may be stuck and
not able to fall.
The seal ring may not be fixed
properly.
There are food remains on the
valve.
The seal ring may be broken.
- 10 -
Install the seal ring to
the rim of the plate
and ensure the seal is
positioned correctly.
Place the seal ring properly.
Ensure the pressure float is
clean, refer to page 9 for the
cleaning instructions.
Gently push the valve to
release the float valve.
To ensure the seal ring is fixed
properly, refer to the cleaning
instructions.
The seal ring will need to
be cleaned to remove food
remains.
The seal ring will need to be
replaced, contact Customer
Support and Warranty.
Install the cover plate
to the cooker and fix
it with the nut.
SOLUTION