Tornado Pac-Vac 6 Roam Mode D'emploi page 8

PREPARING BATTERY PACK FOR CHARGING
1. Plug the charger's power cord into the charger (Fig. 6).
2. Plug the charger's power cord into 120V wall outlet (Fig. 7).
3. The indicator light should turn Red and blink while charging and turn Green when fully charged (Fig. 8). The
battery pack may require approximately 2.5 hours to fully charge.
4. Verify the charge level of the battery pack by pressing the power level indicator button on the front of the
pack. (Fig. 9). Four lights (one red and three green) indicate a fully charged battery. Unplug battery from char-
ger and unplug cord from wall outlet after charging.
*Battery pack may get warm while charging.
Fig. 6
Fig. 8
8
Fig. 7
Fig. 9