Wiring Diagram - König Electronic SEC-VIEW30 Manuel

Wiring diagram:

1. Remove the license plate and holder. Drill a hole ø 7.5mm for the cable of the camera
2. Put the cable of the camera through the hole
3. Mount the camera bracket together with the license plate and holder
4. Put the screws back
5. Choose a suitable place for the positioning of the transmitter
6. Connect the cables. See the diagram below for further details
Note: Each circumstance could require a different way of installation
1. Connect the DC plug of the cigarette lighter cable to the DC 12 V input of the monitor
2. Connect the cigarette lighter plug to the car cigarette lighter connection (or other power source or vehicle)
3