Eschenbach headlight LED Mode D'emploi page 20

light LED is already clipped into the adapter. With item 162452, the
cable clamp (q) is also already clipped onto the temple.
To open the battery compartment cover (a) push it down and insert
3 × 1.5 V size 'AA' batteries in accordance with the polarity diagram
in the battery compartment. We recommend the use of rechargeable
batteries for frequent use. Replace the battery compartment cover.
Attach the belt clip to the back of the battery case for extra mobility.
You can also put the battery case into a pocket of your clothing.
Two separate rubber clips (u) are supplied in varying thickness for
use as a cable guide on temples of differing thicknesses. These en-
sure a clean, trouble-free routing of the cable along the temple. Attach
the appropriate cable clip for the temple of your glasses and press the
cable into the groove:
- 20 -