Christopeit Sport BS 1 Notice De Montage Et D'utilisation page 18

Step 5:
Attach the handlebar (7) at handlebar support (12).
1. Guide the preassembled handlebar unit (7) through the upper part of
the handlebar post (12) and close the bracket of handlebar holder.
2. Push the handlebar cover (10) onto the handlebar screw (25) and tighten
the handlebar (7) in desired position at the handlebar post (12) with
distance tube (9), washer (8) and handlebar screw (25).
3. Push the hand pulse cable (4) thought the holes into the top of handlebar
support (12).
Step 6:
Attach the computer (17) at handlebar support (12).
1. Push the plug of the connecting cable (3) projecting from the handlebar
support (12) into the associated socket of the computer (17). Push the
plug of the pulse cables (4) into the associated socket of the computer
(17).
2. Place the computer (17) on the plate provided for it on the handlebar
support (12) and attach it with the screws (2) and washers (37).
18