Installation; Installation Of Mounting Plate - Electrolux EXl09HL1W Manuel D'installation

Installation

Step 1: Installation of Mounting Plate
1 Fit the mounting plate horizontally on the wall
2 Be sure that the mounting plate has been
Meanwhile, the weight should be evenly shared
by every screw.
3 If the wall is made of brick, concrete or the like,
the wall. Insert clip anchor (item 2 on page 3)
for appropriate mounting screws.
The water tray's outlet for the indoor unit is two-
way drainage design. During installation, the
indoor unit should slightly slant to water tray's
outlet for smooth drainage of condenser water.
Mounting Plate Type A
Wall
Space
to the
wall
above
Left
Mounting Plate Type B
Mark on the middle of it
Fit the mounting plate and drill holes in the wall
according to the wall structure and correcponding
mounting points on the mounting plate.
(dimensions are in mm unless otherwise stated)
Indoor Unit
Model Number Dimension mm
(WxDxH)
EXI09HL1W-A1
EXI12HL1W-A1
EXI09HL1W-A2
EXI12HL1W-A2
EXI18HL1W-A2
Gradienter
Mounting
Plate Type
A
B
B
B
C
above
Wall
Space
to the
wall
above
Right
8