Specifications Of Cav-Mn10 - Sony M-Crew PCLK-MN10A Mode D'emploi

Problem
The system stereo component
does not respond.
The displayed name of the MD or
CD does not match the disc's
contents.
The system sounds (warning
alarm/mail arrival notice) are not
heard.

Specifications of CAV-MN10

Description
Sampling frequency
USB terminal
DIGITAL OUT
ANALOG OUT
Maximum external dimensions
Weight
Cause/countermeasure
t Check that the connections have been made
properly (page 7).
t Disconnect the connecting cables and then
reconnect them.
t Try disconnecting the USB cable from the PC
connecting adaptor and from the computer,
and then connecting it again.
t Click the Reload button (pages 11 and 15 in
the on-line manual).
t Restart M-crew. Should the problem persist,
the data in the Disc Library may be corrupted.
Enter the names again.
t The system sounds have been specified not to
sound during M-crew startup, or the setting
may have changed to OFF when M-crew was
abnormally ended. To restore the sounds,
restart M-crew and then quit the program
normally. Or double-click the backup file
(reg0.reg to reg3.reg) in the M-crew folder and
follow the instructions to set up the program
again.
Adaptor for connecting external devices to a PC
44.1 kHz
Series B, bus power mode (conforms to USB Version 1.1)
* Connect this terminal directly to the PC with the
supplied USB cable.
Square optical connector jack with optical emission
wavelength of 660 nm
Stereo mini jack with an output level of 0.63 Vrms and a
load impedance of 10 kΩ or more
96 × 26 × 106 mm (W × H × D); (not including projecting
parts)
Approx. 140 g
31 GB