CDVI DGLPWLC Manuel D'installation page 3

INSTALLATION MANUAL
DGLPWLC - DGLPFNWLC - DGLIWLC - DGLIFWLC
Proximity Card Readers - Wiegand Output
4] WIRING DIAGRAM : DGLPWLC, DGLIWLC, DGLPFNWLC et DGLIFWLC
DGLPFNWLC and DGLIFWLC
Wiring
Red Input voltage 12VDC
Black 0V
Blue Clock
Green Data 0
White Data 1
Brown Buzzer
Yellow Green LED
Orange Red LED
Terminal (8 pins)
+ Input voltage 12VDC
- 0V
h Clock
D0 Data 0
D1 Data 1
B Buzzer
V Green LED
R Red LED
DIPSWITCh 1 & 2
POSITIONNING
OFF/OFF
26 bits
1 2 3 4
ON/OFF
30 bits
ON
OFF/ON
44 bits
ON/ON
Non allocated
DGLPWLC and DGLIWLC
DIPSWITCh 3
POSITIONNING
The buzzer and the LED's
can be controlled by the
reader or by an external
device.
ON
Centaur Mode
In standard, when a card or
a tag is placed within the reader
the orange LED is activated
and the buzzer emit a tone.
The Centaur controller can
manage the LED and the buzzer
to program other operations.
OFF
CDVI Mode
The controller or the audio entry
system can manage the LED
and the buzzer to program
other operations.
DIPSWITCh 4
POSITIONNING
Pulls up 12 V or 5V
Open collector outputs:
OFF
Pull up 5V
ON
Pull up 12V
Select the output voltage
according to the installation.
cdvi.com
cdvigroup.com
EN
3