Wolpertech 04015 Traduction Du Mode D'emploi D'origine page 14

Environment protection:
Dispose waste professionally
so as not to harm the
environment.
Package:
Protect against moisture
Technical specifications:
Connecting thread
Clamp thickness
Clamp length
Nail thickness
Use as designated
Pneumatic appliances are appliances for craftsmen and
are suitable for: fixing boards with grooves and tongues,
mouldings, skirting boards, facings and similar materials.
Any other use is in conflict with the designation.
Operation
1
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Operating pressure
Clamp width
Nail length
Ø
Ø of nail head
Connect the appliance with
the air intake hose. Do not
aim the appliance at yourself
or other persons.
Use the extension if attached separately.
Compressed air connection:
Connect the maintenance unit with the filter pressure
control valve and the oil mist lubricator.
To ensure continuous and long-term operation, the
appliance must be constantly supplied with pneumatic
oil.
We recommend:
The mini-lubricator can be received under Art. No.
4032 and pneumatic oil under Art. No. 4006
•
Release the lock if applicable.
•
Set the necessary pressure.
• Apply the switch fuse or guide plate on the workpiece
while exerting strong pressure.
14
Press the clamping lever and
move the magazine back to
open.
2
Insert clamps/nails in the
magazine. The appliance
must not be filled if the trigger
is pressed.
3
Move the magazine back to
enable the clamping lever to
fit in.
4
To fire a clamp/nail, pull the
trigger.
5