Accessories; Standard Accessories; Optional Accessories - Metabo HPT H 90SG Instructions De Sécurité Et Mode D'emploi

English
WARNING:
Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
NOTE: Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

(1) Allen Wrench (for 6 mm bolt) (Code No. 944459) ................................................................................................... 1
(2) Side Handle (Code No. 337059) ................................................................................................................................ 1
(3) Bolt M6 × 30 (for Side Handle) (Code No. 993496) ................................................................................................. 4
OPTIONAL ACCESSORIES..........sold separately
(1) Bull Point...for demolitioning
Overall Length
16-9/64" (410 mm)
20-15/32" (520 mm)
(2) Cold chisel...for groove digging and edging
Overall Length
20-15/32" (520 mm)
(3) Cutter...for asphalt + cutting
Overall Length
20-15/32" (520 mm)
(4) Scoop...for scooping work
Overall Length
21-1/2" (546 mm)
12

ACCESSORIES

Code No.
996372
985230
Code No.
985231
Code No.
985232
Code No.
985233
(5) Rammer and Shank...for tamping
Rammer
Rammer
Outer Diameter
7-7/8" (200 mm)
Shank (for Rammer)
Overall Length
15-35/64" (395 mm)
(6) Hammer Grease A
1.1 lbs (500 g) (in a can) (Code No. 980927)
NOTE:
Specifications are subject to change without any
obligation on the part of the metabo HPT.
Shank (for Rammer)
Code No.
305880
Code No.
308092