Télécharger Imprimer la page

AquaMedic Cubicus CF Qube Mode D'emploi page 7

Aquarium d'eau de mer

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
1.
Thread
2.
Rubber sealing
3.
Slide ring
4.
Nut
There is a blue fitting in the mounted bend of the return line. Here, air is sucked in when the pump in the
cabinet fails. This prevents the formation of communicating pipes and an overflow of the filter tank by
returning water.
When starting the aquarium, water has to be filled in until the filter tank is filled up to 10 – 12 cm in the front
part and then the pump has to be started. If the water level in the filter tank decreases, water has to be filled
in until the a.-m. maximum is reached. Take care that enough space is left so that the inflowing water in case
of failure or shutdown of the circulation pump still fits into the filter tank.
4.
Skimmer EVO 500
See separate manual. The skimmer is hooked to the rear wall of the filter sump with the holding unit without
screws (refer to Fig. 1).
5.
Illumination
LED Illumination Qube (see separate manual)
Both Qubes are screwed on the rear panel with the supplied
6.
Operating the aquarium
For operating the Cubicus CF Qube, we recommend our Reef Life series as accessories:
Reef Life Calcium supplies corals with essential calcium and trace elements.
Reef Life Iodine is essential for the care of many corals.
If both additives are applied combined and regularly, they guarantee for successful salt-water aquarist.
We recommend to prepare your sea water with osmosis water in order to minimize from the beginning algae
problems by silicic acids, phosphates and nitrates. Sea-salt of Aqua Medic is formulated from highly purified
compounds. In this way, both products will support you to keep the content of the above-mentioned
substances as low as possible.
The fixing of rocks and corals can easily be done with the underwater adhesive Reef Construct.
7.
Warranty
Should any defect in materials or workmanship be found within 24 months of the date of purchase AB Aqua
Medic undertakes to repair, or at our option replace, the defective part free of charge – always provided the
product has been installed correctly, is used for the purpose that was intended by us, is used in accordance
with the operating instructions and is returned to us carriage paid. Proof of Purchase is required by
presentation of the original invoice or receipt indicating the dealer's name, the model number and date of
purchase. This warranty may not apply if any model or production number has been altered, deleted or
removed, unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect. Please note that the product is not defective under the
terms of this Warranty where the product, or any of its component parts, was not originally designed and / or
manufactured for the market in which it is used. These statements do not affect your statutory rights as a
customer.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved - 10/2018
bracket.
7

Publicité

loading