Listening To A Connected Component - Sony MDR-DS1000 Mode D'emploi

1 Operation

Listening to a Connected Component

Before starting, be sure to read "Connecting the
Headphone System" (pages 8 to 11) and make the proper
connections.
1
Turn on the component connected to the processor.
DVD device or other audio or video
component
2
Connect the headphones to the PHONES jack, and turn on the processor.
The DECODE MODE indicator lights up, depending on the audio signal input
from the connected audio or video component and the setting of the EFFECT
switch.
3
Put on the headphones.
Wear the headphones' (R) on your right ear and (L) on your left ear.
GB
12
Operation
POWER
POWER